Vintage Bicycle Parts
|
Fax: (734) 426-4336 |
Nitto Handlebars and Stems
Handlebars and Stems include: Nitto Technomic Road Stem , bar shims
| | Home | Products | Ordering Info | |
Nitto Classic M176 'Dream' HandlebarThese bars are a solid value, and were designed by Rivendell. They fit a 26.0 clamp diameter stem. They are not a goofy shape. They are not grooved. They are not too narrow, or too wide. They are beautifully made and feature Nitto quality - a modern day reminder of what Cinelli quality used to be. The Nitto classic M176 'Dream' bar has a drop of 140 mm, and a reach of 90 mm. Available in 40, 42 and 44 cm widths (c-c).
Nitto Classic M177 'Noodle' HandlebarThese bars are also a solid value, and were also designed by Rivendell. They fit a 26.0 clamp diameter stem. They are not a (very) goofy shape. They are not grooved. They are not too narrow, or too wide. They are beautifully made and feature Nitto quality - a modern day reminder of what Cinelli quality used to be. The Nitto classic M177 'Noodle' bar has a drop of 140 mm, and reach of 90 mm. Available in 41 and 44 cm widths (c-c).
Nitto M178 Heat-Treated 'Mark's' Handlebar
These bars are also a solid value, and were designed by (Mark at)
Rivendell. They fit a 26.0 clamp diameter stem. They are not a goofy
shape. They are not grooved. They are not too narrow, or too wide.
They are beautifully made and feature Nitto quality - a modern day
reminder of what Cinelli quality used to be. The Nitto classic M178
'Mark's' bar has a drop of 135 mm, and a reach of 82 mm.
Available in 38, 40, 42, and 44 cm widths (c-c).
Nitto Classic B135 'Randonneur' HandlebarThese bars are a solid value too. They fit a 25.4 clamp diameter stem. They are not a goofy shape. They are not grooved. They are not too narrow, or too wide. They are beautifully made and feature Nitto quality - a modern day reminder of what Cinelli quality used to be. The Nitto classic B135 'Randonneur' bar has a drop of 120 mm, and a reach of 105 mm. Available in 39, 42, and 45 cm widths (c-c).
Nitto Technomic Road StemThese stems have a 225 mm tall 22.2 mm quill which really lets one raise the bars very high for a more upright position. The finish is nice too! We offer these in sizes from 7 cm - 12 cm in length. These are available in 26.0 clamp diameter only. Sale!!!! Almost out of stock now, this price still good while they last.....
Nitto Technomic Deluxe Road StemThese
are a bit prettier/fancier than the standard Technomic, but are 35
mm shorter in height. These
are cold-forged, and they have a 190 mm tall 22.2 mm quill which lets
one raise the bars high for a more upright position. The finish is
very nice. We offer these in sizes from 7 cm - 12 cm in length. These
are available in 26.0 clamp diameter only.
Nitto Lugged / brazed Reynolds 853 Steel Road Stem
These were also designed by Rivendell. They have a 180 mm tall 22.2
mm quill which lets one raise the bars high for a more upright position.
The nickel (satiny) finish is nice too! We offer these in sizes from
8 cm - 12 cm in length. These are available
in 26.0 clamp diameter only. Check out
the coordinating lugged seatpost on our Saddles page!
Nitto fillet-brazed Cr-Mo Steel 'Craft-1' Road Stem
These are beautiful new badged, chrome-plated Cr-Mo stems from Nitto.
They have a 150 mm quill height. We offer these in sizes from 8 cm
- 11 cm in length. These are available in 26.0
clamp diameter only.
Nitto Pearl Road StemThese beautifully-finished classic stems have a more typical 150 mm tall 22.2 mm quill. Note: Nitto measures the reach differently on all of their road stems, so they are really about 7 mm longer than their stated size, if you measure them by conventional methods. Available in 26.0 clamp diameter only.
ShimUse this stainless shim pair to install a 25.4 mm bar in a 26.0 mm stem without difficulty.
|
| © 1992-2014 Bicycle Classics LLC. All rights reserved. |